hey guys.... Plz some1 help me...i do evryting exactly as order...YES i do run iw5m_server.exe (NOT iw5mp_server.exe) so i know what im doing...and i did evryting right, but not exactly cuz my server doesnt show up in server list or LAN....but according to the tut, i did evryting seemingly right even the shortcut thingy is done right buuuut :?: ...soo any help would be appreciated ....even my console gives correct commands or writings here you go (CHECK IT) :

Welcome to IW5M r17.
http://fourdeltaone.net/ for help and support 
Connecting to online services....
Connected to online services.
Executing server config "server.cfg"
Succeeded reading from default.dspl
Loaded 2 map entries
Loading DSR "KC.dsr"...
Loading Succeeded for DSR "KC.dsr"
-----------------------------------
Spawning map: mp_overwatch, gametype conf
Initializing Steam Game Server: game port 27017, auth port 8766, query port 27018, gamedir modernwarfare3, version 1.0.0.0
Steam Game Server initialized as Internet Server.
Steam Master Servers found (1). Server will be Internet Server listed.
[scriptLoader] Loading script GameLog
Spawn map (mp_overwatch, conf) complete.
-----------------------------------

THX IN ADVANCE,

Sam7, Out

You need help Np Add me in Steam I.Q|Mega

 

 

And sut up Teamvier & iam Working the Iw5mp_Server

You need help Np Add me in Steam I.Q|Mega

 

 

And sut up Teamvier & iam Working the Iw5mp_Server

 

can i send u a PM (OFCourse u know that means Private Message ) with my Teamviewer ID and pass :?: ?? cuz my steam is SRSLY EFFD upp

Hello everybody!

I put online my server.

This is the command line...

 

+set dedicated 2 +set net_queryPort 55103 +set net_port 27019 +set net_authPort 8766 +set net_masterServerPort 27034 +set sv_maprotation "default" +set sv_maxclients 18 +start_map_rotate

 

The console si fine...

 

Welcome to IW5M r17.

http://fourdeltaone.net/ for help and support

Connecting to online services....

Connected to online services.

Executing server config "server.cfg"

Succeeded reading from default.dspl

Loaded 16 map entries

Loading DSR "hq.dsr"...

Loading Succeeded for DSR "hq.dsr"

-----------------------------------

Spawning map: mp_seatown, gametype koth

Initializing Steam Game Server: game port 55103, auth port 8766, query port 27034, gamedir modernwarfare3, version 1.0.0.0

Steam Game Server initialized as Internet Server.

Steam Master Servers found (1). Server will be Internet Server listed.

[scriptLoader] Loading script GameLog

Spawn map (mp_seatown, koth) complete.

-----------------------------------

 

I opened every ports and the server letВґs showned in the list.....

But.... nobody can join it!!!!!!

Help me please!

 

IВґve put online several servers of T...o and I know how to do this... but here something es wrong!

Good Tutorial, everything works fine. But I don't see my Server ( IW5M Mixed [GK]).

I opened(or whatever i did with) the Ports but it still shows me Nat - Strict.

I can choose UDP or TCP which should I use?

Same here, followed the tutorial but my server is neither on the server list=Internet or Lan. :?

I did everything correctly but my server is not in the server list (neither in LAN nor in Internet tab). I could connect to it using the ~ menu and type "connect [local ip:port]"

 

Server console:

Welcome to IW5M r17.
http://fourdeltaone.net/ for help and support 
Connecting to online services....
Connected to online services.
Executing server config "server.cfg"
Succeeded reading from DLC.dspl
Loaded 12 map entries
Loading DSR "TDM_default.dsr"...
Loading Succeeded for DSR "TDM_default.dsr"
-----------------------------------
Spawning map: mp_aground_ss, gametype war
Initializing Steam Game Server: game port 27015, auth port 8766, query port 27017, gamedir modernwarfare3, version 1.0.0.0
Steam Game Server initialized as Internet Server.
Steam Master Servers found (1). Server will be Internet Server listed.
[scriptLoader] Loading script GameLog
Spawn map (mp_aground_ss, war) complete.
-----------------------------------

 

Btw, I checked all required ports using PFPortChecker results are all green in all of them.

I excluded the game folder from anti-virus and even disabled my firewall.... Same thing

[Edit][Edit]

no luck

 

I have the same problem as to who could solve greetings/my ip is published bypasses router or firewall still did not appear in the server list

Does IW5M in 4D1 run in patch 1.9?

Can some one help me to show the downloaded link for MW3 patch 1.9?

I've tried it on two different computers -- my server and my desktop, both running windows 7, and I can't connect to the server on any port. I've got a DMZ set up and it's allowed through my firewall. I re-installed and ran DSUT again on my personal computer, this time not changing anything but the server name, and still cannot connect or get info. EDIT: I've also tried intranet IP, external IP, hostname.

 

My MW2 dedi is still working fine, though.

 

Here's the status of MW2 (Running on same machine):

http://lanparty.troll.so/mw2/index.php? ... 8960:28960

 

iw5m_server.exe +set net_port 27015 +set net_masterServerPort 27017 +set dedicated 2 +set sv_config "server.cfg" +start_map_rotate

 

All files are default, no changes, not even map rotation or gametypes. I changed the server name and that's it. I even disabled my firewall on both machines to no avail.

 

 

Strange.. the forums now edit out MW/3 and MW/2 and replace them with MW3 and MW2.

Somebody know, Why Im writing :

iw5m_server.exe +set sv_config "server1.cfg" +set dedicated 2 +start_map_rotate +set net_queryPort 27017

and getting in console different ports:

Spawning map: mp_dome, gametype jugg
Initializing Steam Game Server: game port 27017, auth port 8766, query port 27018, gamedir modernwarfare3, version 1.0.0.0

? :|

why in this tutorial the server command is skipping net_queryPort???

 

as far as I know, iw5m_server is still listening on 3 different udp ports, not 2

 

the usual practice for a single server is to use:

 

+set net_queryPort 27014 +set net_port 27015 +set net_masterServerPort 27016

 

for all the port forwarders, port forward udp only, no need to forward tcp

tnx for tutorial , i have a problem with dedcated server i can t find it on lan tab or any of the others :?: so how can i connect to it if i can t see it ? :!:

I created my server and i open and dont happen any error,but i cant see my server in internet tab or LAN tab and i cant connect using "connect 192.168.0.167(my ip)" Pls help me !

Not supposed to use that and that's your IPv4 address not your actual IP. Google: what is my ip and that IP there is your real IP.

 

no need for ports to connect ? if needed tell me what port do i type in like query or gameport .. !

Hi

 

Sorry if this is poorly translated but I'm French and I use google translate to in English.

So I have a problem with creating the server mw3 at the launch island but the game has stop working.

I have put the 2 file DSTU and I perform well, I have my port open and I have created the shortens info with a note in the target.

Do you have a solution to this problem?

I created my server and i open and dont happen any error,but i cant see my server in internet tab or LAN tab and i cant connect using "connect 192.168.0.167(my ip)" Pls help me !

connect ip:port

what s the port i have 4 ports man

Hello everybody!

I put online my server.

This is the command line...

 

+set dedicated 2 +set net_queryPort 55103 +set net_port 27019 +set net_authPort 8766 +set net_masterServerPort 27034 +set sv_maprotation "default" +set sv_maxclients 18 +start_map_rotate

 

The console si fine...

 

Welcome to IW5M r17.

http://fourdeltaone.net/ for help and support

Connecting to online services....

Connected to online services.

Executing server config "server.cfg"

Succeeded reading from default.dspl

Loaded 16 map entries

Loading DSR "hq.dsr"...

Loading Succeeded for DSR "hq.dsr"

-----------------------------------

Spawning map: mp_seatown, gametype koth

Initializing Steam Game Server: game port 55103, auth port 8766, query port 27034, gamedir modernwarfare3, version 1.0.0.0

Steam Game Server initialized as Internet Server.

Steam Master Servers found (1). Server will be Internet Server listed.

[scriptLoader] Loading script GameLog

Spawn map (mp_seatown, koth) complete.

-----------------------------------

 

I opened every ports and the server letВґs showned in the list.....

But.... nobody can join it!!!!!!

Help me please!

 

IВґve put online several servers of T...o and I know how to do this... but here something es wrong!

 

ANY SUPPORT HERE?!?!?!?!?!

i have this errore message:

 

Error: default (66): Could not load recipe 'TDM_default' skipping entry

Error: default (67): Could not load recipe 'FFA_default' skipping entry

Succeeded reading from default.dspl

Loaded 0 map entries

Could not load map rotation "default". Shutting down

My servers all worked (incl. b3). After a full restart of the server, ppl still see them in the serverlist, but noone can connect (same problem as most of the ppl here). So its not a configuration error, otherwise i had it before too!

 

Pls. help us solve this problem!!!! I can help u test with what u want....

And now they work again.. LOL... strange!

we have host but the admin can t see his server why ??

danielberta":w3g9fuwx]i have this errore message:

 

Error: default (66): Could not load recipe 'TDM_default' skipping entry

Error: default (67): Could not load recipe 'FFA_default' skipping entry

Succeeded reading from default.dspl

Loaded 0 map entries

Could not load map rotation "default". Shutting down

none of those files are present in your admin folder

why in this tutorial the server command is skipping net_queryPort???

 

as far as I know, iw5m_server is still listening on 3 different udp ports, not 2

 

the usual practice for a single server is to use:

 

+set net_queryPort 27014 +set net_port 27015 +set net_masterServerPort 27016

 

for all the port forwarders, port forward udp only, no need to forward tcp

masterport seems to override any of the other port settings when it's used

I am currently testing to see how to set them but if you set master server yourself, it won't let you set the others

It's strange

how I connect to my server?

Someone fubar:d the variables somehow.

 

+set net_port 28992 <-- connected to if by some miracle you get the server to show up in the serverlist (determined with exact same settings elsewhere, from where the server did for some weird reason show up on the list...)

+set net_queryPort 28990 <-- connected to when using console 'connect yourserver:28990'. This works fine but no cigar on getting the server to show up on the serverlist.

+set net_masterServerPort 28991 <-- RCON port

 

could try hooking the server up with a proper public IP if the problem lies with natting etc, but seriously doubt that since the direct console connect works just fine. Is there some kind of NAT detection etc that could mess with the server being listed? (For reasons beyond comprehending im behind two PNAT:s, but every other server works fine)

 

http://xlrstats.supersik.net <-- hosted behind this contraption.

About few days ago the server worked but now I cannot connect in it our I get connection timeout.

I portfowarded the ports that the tutorial instructed.

I just put up a MySQL Database and I set up B3

I tried to run the server without B3 but it still does not work, please help